Back to home | bookmark our website |    Hello, welcome to Wuxi Bonrxin Environmental Technology Co., Ltd.!

分享到新浪微博

home »

行业资讯

How to maintain laser marking smoke purifier

Publisher: Wuxi Bonrxin Environmental Technology Co., Ltd. Release time:2018-9-3 20:26:59 The number of clicks: shut down

Laser marking smoke purifiers are a type of cleaning equipment commonly used in the industry, mainly for laser marking waste collection, air filtration and purification. For industrial equipment, it is generally not replaced frequently. On the one hand, the cost is too high, and the second is that the replaced equipment cannot be reused to cause waste of old materials. So what should you pay attention to when using the laser marking smoke purifier to extend its service life? Xiaobian is here today to tell everyone how to do "maintenance" of the purifier.
First of all; when you don't need to use an industrial vacuum cleaner, put it in a ventilated and dry place. The hose should not be folded and folded frequently. The tensile and bending strength should not be too large.
Secondly, when using the industrial vacuum cleaner, fasten the hose, nozzle and connecting rod interface, especially the small gap nozzle, floor brush, etc. If you find any foreign matter blocking the straw, you should immediately shut down the machine. , remove foreign matter and continue to use
Thirdly; avoid excessive operation when using, avoid impact, and check whether there is no perforation or air leakage after each work. After use, clean up the debris in the barrel and all the dust attachments and dust bag.
Fourth; stop every half an hour, generally continuous work should not exceed 2 hours, industrial vacuum cleaners will increase the loss of the machine for a long time, just as people work too long, the body will not be able to eat.
Fifth; do not use industrial vacuum cleaners to absorb gasoline, banana water, cigarette butts and broken glass, needles, nails and the like, and absorb moist objects, liquids, sticky objects and dust containing metal powder. The above points are related to how to extend the service life of industrial vacuum cleaners. I hope that everyone can avoid these points in the future use, better protect the machine, and also save costs. Www.bonrxin.com

Products Recommended

BCB-M600
BCB-M1000
Bamboo tube
hose
Similar article ranking
1
How to maintain lase
2
Which laser smoke pu
3
Advantages of Wuxi S
4
Laser welding fume p
5
Standardize the mark
6
How to choose a weld
7
The main advantages
8
Development directio
9
How is solder fumes
10
Green Mission is wit
Latest news articles
1
How is solder fumes
2
Green Mission is wit
3
Soldering fume purif
4
Soldering fume purif
5
Which laser smoke pu
6
Standardize the mark
7
How to maintain lase
8
Advantages of Wuxi S
9
Laser welding fume p
10
The main advantages