Smoke Processor BCB-350W-YF

This product is a purification product for dust, odor, toxic and harmful gases generated by laser marking, laser engraving, cutting, grinding and other occasions. Has a good dust filtration, odor treatment effect. Multi-layer filter unit is used, including 5um filter bag, 0.3um PP filter core and activated carbon filter. It can effectively filter and intercept all dust-contaminated particles on 0.3μm, and the filtration purification rate can reach 99.70%. And the activated carbon filter core adsorbs some toxic and harmful gases, such as benzenes, ketones, alcohols, alkanes and their mixed organic waste gases. The clean air treated by the purification equipment can be directly discharged indoors. This product is flexible and can be used with filter core according to the use environment; if it is used to handle large dust environment, it can be used separately with filter bag and PP filter core combination; when dealing with large odor environment, it can use 4 layers of activated carbon plus filter bag combination.
Features
1. Centrifugal fan
The brushless DC motor centrifugal fan has a longest life of up to 40,000 hours and requires no maintenance reliability. Low operating noise, high speed, high wind pressure and high performance.
2. LCD
Independently research and development of microcomputer LCD screen, using programmable single-chip software to achieve digital control; simple interface, operating parameters at a glance. Automatically detect the working state of the fan, and automatically alarm the pipe gambling plug and filter saturation. Low pressure control greatly improves safety.
3. Dust bag
This product uses a large-capacity dust bag to filter dust above 5um. A total of 6 layers, can accommodate a large number of dust particles. When the dust collection reaches a certain amount, it can be taken out and cleaned up and then used. Convenient and simple, saving time and effort.
4. Multi-layer filtration system
This product uses a total of three filters, which are 5um dust bag for dust filtration, 0.3um imported PP paper filter, and activated carbon filter. Filtration layer by layer according to filtration precision, and finally achieve complete filtration of dust above 0.3um. Finally, the last toxic and harmful gas adsorption is carried out by the high-efficiency activated carbon filter for the air level containing no dust above 0.3um, so as to achieve the final clean air discharge.

Products Recommended

BCB-M600

BCB-M1000

Bamboo tube

hose